Things to Check Whenever Your Whirlpool Electric Dryer Will not Start

The best current

The very first factor the dryer must have, may be the correct current in the terminal block. There must be 240 volts from L1 to L2 and 120 volts from N to L1 and N to L2.

The thermal fuse

The thermal fuse is really a protective device that's experience the dryer. The thermal fuse will blow when the operating thermostat isn't opening in the preset temperature of approximately 150 levels.
Whenever you discover the thermal fuse blown, you have to switch the operating thermostat and thermal fuse simultaneously.

The push to begin switch

The push to begin switch is really a switch that's use to begin the dryer motor. You will find two various kinds of push to begin switches.

The standard push to begin switch and also the relay push to begin switch. The standard switch is really a momentary switch, quite simply is just on when you are pushing it. The relay one stays on whenever you push it throughout the entire cycle.

The doorway switch

The doorway safety switch is use to make certain the dryer stops running whenever the door around the dryer is open.

This switch works together the push to begin switch, quite simply, whenever you open the dryer door, the dryer stop running, to begin the dryer again you will have to close the doorway and push the beginning button to have it running again.

The timer

The timer may be the hairdryers brain. It manages disbursing the electricity right parts within the dryer. As time passes and usage the contacts put on out and often will not make good contact.

The motor
The motor manages turning the hairdryers tumbler and making the ultimate link with the heating circuit.

While you often see you will find many parts that has to be looked into to discover why your Whirlpool electric dryer will not start.

Going for a guess when changing parts is quite costly. The simpler strategy is to learn to check these parts to be able to have the ability to fix your dyer yourself.